Here are the specifications for the Scan-Beam.
However, prior to order, for the very latest specifications we recommend you Contact Us.

Operation Detect a vehicle or person, crawling or running up to 10m/s.
Maximum operating range 500 m
Minimum operating range 10 m
User interface Web-browser based Graphical User Interface (GUI)
Set-Up Using web browser. Select operating channel. Align using Receive Signal Strength Indicator (RSSI), then set alarm threshold.
Alignment Adjustable bracket to easily orientate unit.
Install height Typically 0.5m to 1m, pole mounted
Interface Ethernet 100Mbps, RJ45 port. Circular multi-pole header for alarm relay.
Software Upgradeable in service using website
Alarm data Output to third party software, IP alarm function.
Probability of detection At least 0.99
False alarm rate Typically 1/unit/year based on signal to noise ratio.
Processing Microprocessor controlled, Digital Signal Processing (DSP) to reduce false-alarms.
Supplied kit Mounting bracket, operating manual. Optional 10m cable for alarm relay and other physical interfaces.

Operating frequency band 24.05 - 24.25 GHz (license exempt ISM band)
Operating channels 10 (selectable at installation)
Transmitted power +20dBm (100mW) EIRP
Antenna beam width Nominal 5° azimuth and 10° elevation
Alarm relay Volt-free contact (relay), max voltage 24V, max current 25mA. Active impedance nominal 45ohms, inactive impedance > 100kohms.
Temperature range -20°C to +55°C
Power supply Power-Over-Ethernet (POE), 802.3af compliant
Power consumption Transmitter: nominal 1.8W (2.1W with Ethernet connection). Receiver: nominal 3.2W (3.5W with Ethernet connection).
Interface Alarm relay, Ethernet (IP).
Routine maintenance None required
Colour Light grey standard, optional camouflage paint schemes
Dimensions 220 x 210 x 60mm excluding brackets & sunshield
IP rating IP65
Approvals EN300440 RF, EN301489 EMC, IEC60950 Safety.
RF Hazard None (<0.5mW/sq cm average at antenna)

pdficon PDF drawing showing dimensions (with sunshield and bracket fitted)

Universal bracket is suitable for pole mount or wall mount.

Ogier Electronics reserve the right to alter this specification without notification